Replacement Handles For UPVC Windows

UPVC window handles come in various styles, however all of them operate the same locking mechanism. To replace a uPVC handle, remove the top screw from the base of the window replacement handle which will reveal two screws.

Then, measure the spindle to ensure your new handle will fit. It's crucial to know what kind of handle you've got as there are many different sizes.

Inline Espagnolette Handles

Espagnolette handles are present on the majority of modern double glazed windows and operate multi-point locks which provide greater security. They function by using a 7mm square spindle at the back of the handle which connects to a gearbox on the inside of the window frame which moves multi-locks when turned. They are available in a variety of styles, including cockspur keys, inline and locking handles.

Our uPVC replacement handle kits are designed to make it simple to replace a damaged or faulty espagnolette window handle. These uPVC handle sets are packaged with a selection of spindle lengths to suit the majority of applications. They come with all of the fixing screws required included. They also come with key-plugs which allow them to change from the standard open/closed handles to fire escape or egress locking handles (if used with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another alternative is our Yale Sparta 2 Inline Espag Handle that has been designed for minimal aesthetic intrusion by having a lower base. It is part of the suited hardware range and is available in a variety of finishes that comply with the requirements of BS EN1670:2007 Grade 5. They have been tested for durability and are suitable for use with acidic woods and coastal environments. They are compatible with cylinder-immobiliser inserts to lock keys where required.

Cockspur Handles

Most often found on older uPVC and aluminium windows cockspur handles are a simple catch and latch. The handle's nose is closed onto or into the catch which is a block of plastic placed on the window glass replacement frame. The wedges come in various sizes, and it is crucial to determine the step height you need before buying a replacement handle. Typically, uPVC frames have a handle step of 9mm and aluminium frames tend to use a step height of 21mm.

A cockspur handle is locked using a key, ensuring additional security for your home. The lock is inserted into the handle using spindles that fit into the handle through the hole for locking (also called a backset). The spindle measures 7mm square and can be used to open or close the window.

If you are replacing a cockspur handle, it is important to ensure that the replacement handle has the same step height as the original. Usually, this measurement is taken from the bottom of the spur on the handle to the underside of the nose of the handle. This measurement is also referred to as the stack height or backset and it is crucial that you know this prior to purchasing a handle.

Cockspur handles can be straight/universal or cranked. They are available in left or right handed versions. This is to allow the handles to be positioned on windows that open to the left or right and to allow the operator easier access to the window.

It is essential to determine whether or not your window needs a restrictor that is designed to stop the handle being extended beyond a certain amount. These are usually required for high-rise buildings or commercial buildings for security reasons. However, the majority of homes don't require these.

There are a variety of different styles and colors of the cockspur handle, such as stainless steel brushed and white uPVC options. The ideal cockspur handle for your windows depends on your style and preference and the way you want the window to function.

Handles that turn and tilt

The UK is home to a wide range of double-glazed Windows Seal Replacement with tilt and turn handles. They are found on both timber and upvc windows. The handle can be rotated at any angle, even 180 degrees. This allows the window to be fully opened into the room and also be lowered to let in air. The handle is locked in this position, which requires keys to unlock the handle if required to open it.

This kind of handle is simple to replace, having just one handle instead of multiple smaller ones. This makes it less obvious the handle, and is more in line with modern minimalistic design trends. They are also much easier to clean since they are able to open inwards.

They are also four to eight times stronger than a conventional casement window. This makes them ideal for doors and windows that are larger. The frames also have a steel core that adds durability and strength.

The tilt and turn mechanism is safer than that of the casement window, because the handle can be locked at any angle. This is especially crucial in areas where children are present, as it prevents children from opening windows.

Tilt and turn windows are a common option for a lot of homes due to their ability to be used in various ways. They can be opened horizontally like a regular window, or dropped down to the style of a hopper. This is an excellent option for those who want to improve the airflow inside their home. They can also aid in noise reduction. They are also easy to clean and maintain, because the glass is easily removed. They are available in a variety of sizes and colors. These windows are ideal for any house, and can complement both traditional and modern styles.

Crank Handles

Crank handles are simple to operate and offer an excellent view of the outside, without obscuring the glass. These handles are usually used on casement windows that are hinged at the side or awning windows. They come with an mechanism similar to a window bar, and linkage arm, that supports the window sash. The window sash is opened or closed when you crank the handle clockwise. In contrast to other types of handles, a crank window's mechanism and handle are subject to wear and tear, which can cause the gears to strip and the handle to cease working or fall off the shaft of the operator. Regularly inspecting the crank handle as well as the mechanism for operating it will ensure they remain in good shape for many years.

A crank handle consists of a mechanical arm that's attached to a rotating shaft that is perpendicular. The handle is rotated in a circular manner by gripping and rotating it, much like you would operate a sharpener. In some applications, the handle may be operated via a leg.

The base of the crank handle is hollow. This allows the handle to be connected to machinery and equipment. The handle's arm also includes a connecting rod which converts the circular motion of the handle into a rotary or reciprocating motion to operate machines and equipment.

Boats are usually transported on trailers using crank handles, as well as machines and equipment that can be adjusted. They are typically made from stainless steel, which is resistant to corrosion in marine environments. Most boat crank handles are coated in powder to guard against damage and make them easier for cleaning.

If your crank handle has stopped working or isn't able to open the window, it may be time to replace it. Before doing this, look for screws that attach to the trim inside the frame's screen track. If there aren't any, you can try to loosen the cover with a stiff putty knife by sliding it between the window jamb and the frame and pulling on it. If that doesn't help you, remove it and get access to the crank by unscrewing screws in the window frame.